4
GB
Original Instructions
Laser Safety
The laser used in this device is a Class 2 laser with maximum power of ≤1mW and a
wavelength of 650nm.
These lasers do not normally present an optical hazard, although staring at the beam may
cause flash blindness.
WARNING: Avoid direct eye contact.
A hazard may exist if you deliberately stare into the beam, please observe all safety rules
as follows:
• The laser shall be used and maintained in accordance with the manufacturer’s
instructions
• Never aim the beam at any person, and particularly not into the eyes of any person or
animal, or any object other than the workpiece
• Always ensure the laser beam is aimed at a sturdy workpiece without reflective
surfaces. i.e. wood or rough-coated surfaces are acceptable. Reflective sheet steel
or similar is not suitable for laser use as the reflective surface could direct the beam
back at the operator
• Do not change the laser light assembly. Repairs must only be carried out by the laser
manufacturer or an authorised agent. DO NOT exchange with a different type of laser
CAUTION
: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Please refer to the relevant EN standards, EN61326-1:2013 for more information
on Lasers.
Intended use
Battery-powered device for measuring distance up to 40m with additional functions for
calculating surface area, volume, and Pythagoras triangle calculations.
Before Use
Installing/removing the backing clip
Installing the batteries
1. Remove the Backing Clip (8) to reveal the Battery Insert (9)
2. Press the tab and pull the Battery Insert cover out
3. Insert the 2 x AAA 1.5V batteries, matching the ‘+’ and ‘-‘ terminals correctly (See Fig. II)
4. Reinstall the Battery Insert cover, then the Backing Clip
Operation
WARNING:
This product emits a laser beam. Do not stare into the laser beam and
never point this product at another person.
Switching ON/OFF
Note:
This device will automatically switch off after 180 seconds when not in use. If this
happens, switch back on to continue usage.
Note:
This device’s laser will automatically switch off after 30 seconds when not in use.
Switching ON
• Press and hold the ON/OFF/Clear Button (6) until the LCD Screen (2) is illuminated
• The meter is ready to use
Switching OFF
• When the meter is on, press and hold the ON/OFF/Clear Button (6) until the device
switches OFF and the LCD Screen (2) becomes blank
Meter:
1
Laser/Sensor
2
LCD Screen
3
Laser/Measurement Button
4
Area/Indirect Measurement Button
5
Measure Reference Point Button
6
ON/OFF/Clear Button
7
Backing Clip Release Button
8
Backing Clip
9
Battery Insert
LCD Screen (2) breakdown:
A
Battery Charge Level
B
Historical Memory
Product Familiarisation
Maximum measuring range: ............................................................. 0.2–40m
Measuring accuracy:…………………...........................................± 1.5mm
Measuring units: ...................................................................................Metres
Laser class: .......................................................................................... Class 2
Laser wavelength:. ................................................................... 650nm, ≤1mW
Power supply: .........................................2 x AAA 1.5V batteries (not included)
Operating temperature:……………. .............................................0°C–40°C
Storage temperature: ................................................................... -10°C–60°C
Auto laser off: .................................................................................30 seconds
Auto power off: ............................................................................180 seconds
Specification
C
Value 1
D
Value 2 / Minimum Value
E
Value 3 / Maximum Value
F
Summary Line / Calculation Result / Latest Value
G
Measuring Mode Indicator
H
Setting
I
Continuous / Distance Measurement
J
Base Reference Point Setting
K
Top Reference Point Setting
L
Laser ON / OFF
( Fig. I )
( Fig. I|)
9
8
8
7
9
727787_Z1MANPRO1.indd 4
27/04/2016 16:33
Содержание 727787
