ES
26
- Nunca deje que el agua entre en contacto con la herramienta.
- Nunca utilice disolventes ni productos abrasivos para limpiar el cargador
Almacenaje
• Guarde esta herramienta y accesorios en un lugar seco y seguro fuera del alcance de los niños.
Reciclaje
Deshágase siempre de las herramientas eléctricas adecuadamente respetando las normas de
reciclaje indicadas en su país.
• No deseche las herramientas y aparatos eléctricos junto con la basura convencional. Recíclelos
siempre en puntos de reciclaje.
• Póngase en contacto con la autoridad local encargada de la gestión de residuos para obtener
más información sobre cómo reciclar este tipo de herramientas correctamente.
Problema
Causa
Solución
El fusible (7) se ha fundido.
Las pinzas (8 y 9) están en contacto.
Separe las pinzas y sustituya el fusible.
Polaridad de las pinzas (8 y 9) invertida.
Sustituya el fusible y coloque las pinzas de forma correcta.
Batería averiada.
Sustituya la batería y el fusible.
La batería descargada no carga.
Conexión incorrecta.
Asegúrese de que las pinzas (8 y 9) estén conectadas firmemente. Limpie los terminales
si es necesario.
Batería sulfatada.
Sustituya la batería o consulte con un especialista para desulfatar la batería.
Fusible fundido.
Sustituya el fusible.
Batería de 12 V y cargador ajustado a 6 V
Ajuste el voltaje del cargador correctamente.
La batería descargada carga
lentamente.
Batería fría.
La velocidad de carga se incrementará conforme se caliente la batería.
El nivel de agua destilada de la
batería se ha reducido y el agua bulle
y borbotea.
Batería sobrecargada.
Desconecte el cargador de la toma de corriente y asegúrese de que el área esté ventilada.
No fume o coloque el cargador cerca de las llamas. Llene la batería con agua destilada
(siga las instrucciones del fabricante). Compruebe que la batería esté en buen estado.
Cargador ajustado en modo de carga rápida.
Batería de 6 V y cargador ajustado a 12 V.
Solución de problemas
549095_Manual .indd 26
08/08/2017 14:09