![background image](http://html1.mh-extra.com/html/silverline/129901/129901_manual_1273270005.webp)
www.silverlinetools.com
5
1050W Hammer Drill
129901
General Safety
WARNING Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
WARNING: This appliance is not intended for use by persons
(including children) with reduced, physical or mental capabilities
or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children must be supervised to ensure that
they do not play with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work Area Safety
a)
Keep work area clean and well lit.
Cluttered or dark areas invite
accidents
b)
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes
c)
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control
2) Electrical Safety
a)
Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock
b)
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased risk
of electric shock if your body is earthed or grounded
c)
Do not expose power tools to rain or wet conditions.
Water entering
a power tool will increase the risk of electric shock
d)
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock
e)
When operating a power tool outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock
f)
If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD
reduces the risk of electric shock
3) Personal Safety
a)
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools may result in serious
personal injury
b)
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries
c)
Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising power tools that have the switch on invites
accidents
d)
Remove any adjusting key or wrench before turning the power tool
on.
A wrench or a key left attached to a rotating part of the power tool
may result in personal injury
e)
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations
f)
Dress properly. Do not wear loose clothing or jewellery.
Keep
your hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts
g)
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards
4) Power Tool Use & Care
a)
Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at
the rate for which it was designed
b)
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired
c)
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool accidentally
d)
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users
e)
Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly maintained
power tools
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control
g)
Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for
operations different from those intended could result in a hazardous
situation
5) Service
a)
Have your power tool serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained
Hammer Drill Safety
WARNING:
It is imperative to follow all national safety regulations
concerning installation, operation and maintenance.
WARNING:
If you suspect or discover asbestos is present in any
area you are working seek professional advice immediately. Removal of
asbestos should be done by a licensed contractor. Contact the HSE in the
UK (www.hse.gov.uk) or your national health and safety authority in your
country for further information about dealing with asbestos. European
Directive 2009/148/EC provides additional information related to exposure
to asbestos at work.
a) DO NOT allow anyone under the age of 18 years to use this tool,
and ensure that operators are qualified and familiar with the
operating and safety instructions.
b) When using the drill, use safety equipment including safety
glasses or shield, ear defenders, and protective clothing including
safety gloves.
Wear respiratory protection suitable for the work being
undertaken. A minimum rating of FFP2 is recommended. If operating
the tool causes discomfort in any way, stop immediately and review
your method of use.
c) Hammer drills produce a very high level of vibration when
operating in hammer or chisel mode.
Frequent breaks are advised.
Wear suitable protective anti-vibration gloves that are non-fabric or
coated fabric to prevent loose strands of material catching in the
rotating drill bit. Discard gloves immediately if material is visibly frayed.
129901_Z1MANPRO1.indd 5
13/11/2015 15:54
Содержание 129901
Страница 2: ...2 5 9 8 10 6 1 4 3 11 7 2...