![background image](http://html1.mh-extra.com/html/silverline/124445/124445_manual_1273339005.webp)
4
GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Toxic fumes or gases!
Caution!
Double insulated for additional protection
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Sound and vibration levels in the specification are determined according to
EN 60745. The figures given can be used to compare similar tools tested to
this standard. These figures may be used to assess exposure to noise and
vibration levels.
The figures represent normal use for the tool in normal working condition.
A poorly maintained, incorrectly assembled or mis-used tool may produce
increased levels of noise and vibration. The total working period that
you can operate this tool must factor in periods where the tool is idle or
switched off. Allow frequent rest breaks when operating this tool.
It is in the interest of users to maximise their safety using the correct safety
equipment like ear defenders that protect against loud or repetitive noise
and anti-vibration gloves that minimise vibration. Do not operate the tool
with your hands below a normal comfortable temperature as vibration will
have a greater effect.
www.osha.europa.eu
provides information on sound and vibration levels
in the workplace that may be useful to domestic users who use tools for
long periods of time
Carefully read and understand this manual and any label attached
to the tool before use. Keep these instructions with the product for
future reference. Ensure all persons who use this product are fully
acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all
residual risk factors. Use with caution. If you are at all unsure of the
correct and safe manner in which to use this tool, do not attempt to
use it.
General Safety
WARNING
Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
Children must be supervised to ensure that they do not
play with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Original Instructions
V
Volts
~
Alternating current
A
Ampere
n
o
No load speed
Hz
Hertz
W, kW
Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
Specification
Voltage:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 – 240 V~, 50Hz
Power:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400W
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6000min
-1
Disc diameter:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230mm
Spindle thread: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M14
Ingress protection:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IP20
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.50kg
Sound and vibration information:
Sound pressure L
PA
:. . . . . . . . . . . . . . . . . . . . . . . . . . . 83.5dB(A)
Sound power L
WA
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96.5dB(A)
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration a
h
: . . . . . . . . . . . . . . . . . . . . . . . . . . 4.73m/s
2
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s²
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
PDF Compressor Pro
Содержание 124445
Страница 3: ...2 1 7 3 2 8 9 A B D 4 5 6 15 C...