Silvercrest SZP 25 B2, Руководство по эксплуатации, Страница: 8 / 58

6
GB
5. How to use
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
• Clean the device prior to its first
use
(see “Cleaning” on page 7) !
6. Operation
6.1 Assembling the citrus
press
DANGER!
~
Only plug the mains plug 11 into the
wall socket after the device has been
completely assembled.
1. Uncoil the power cable 11 from the
cable spool
10
to the desired length.
2. Place the base 9 on a dry, solid and
level surface.
3. Figure C: place the juice container 7
on the base 9 with the handle above
the arrow and turn it clockwise until it
locks into place.
4.
Figure D:
place the upper screen
4
on
the bottom screen 5 so that the screen
opener 6 sticks through the opening,
and the screens lock into place.
5. Place the assembled screen
4
/
5
on the
juice container 7 so that the handles fit
perfectly one on top of the other.
6. Place the small juicer cone 3 on the drive
axle 8 . In the process, the small juicer
cone 3 must lock into the screen 4 / 5 .
For large citrus fruits (e. g. oranges,
grapefruit) place the large juicer cone 2
on the small juicer cone 3 so that the
wings of the small juicer cone 3 fit into
the recesses of the large juicer cone 2 .
7. Insert the mains plug
11
into a wall
socket corresponding to the technical
data.
6.2 Extracting the juice from
citrus fruits
WARNING!
~
Ensure that no foreign body is on the
screen
4 / 5 or in the device when oper-
ating it.
~
Do not put excessive pressure on the
juicer cone
2 / 3 .
NOTES:
• Empty the juice container 7 no later
than when filled to the 600 ml mark.
• In order to achieve the largest juice
yield possible, the juicer cone changes
the direction of rotation after several
starts and stops.
Setting the pulp content
Figure E: using the screen opener 6 , you
can influence the pulp content of the juice:
• High pulp content: Set the screen opener
6
to the large dot marks so that the openings
in the screen
4 / 5 are open wide.
• Low pulp content: Set the screen open-
er 6 to the small dot marks so that the
openings in the screen 4 / 5 are closed.
1. Cut the citrus fruits in half.
2. Exert slight pressure on the halves of the
citrus fruit when pushing the cut surface
down onto the juicer cone
2 / 3 . The
juicer cone 2 / 3 starts turning, and the
juice flows into the juice container 7 .
3. As soon as you stop pressing on the
juicer cone 2 / 3 , the device stops.
4. If the juicer cone 2 / 3 is not turning,
check if there are pips between the juic-
er cone and the screen
4 / 5 and re-
move them, if necessary.
BB&3(B%ERRN6HLWH'LHQVWDJ-XQL