Silvercrest SWKS 2200 B1, Руководство по эксплуатации

Страница: 38 / 54

36 GB
4. Items supplied
1 Kettle 2
1 Device base 4
1 Set of operating instructions
5. How to use
DANGER! Risk of electric
shock!
~
Only connect the device to an easily ac-
cessible wall socket whose voltage cor-
responds to the specifications on the
rating plate. The wall socket must contin-
ue to be easily accessible after the de-
vice is plugged in.
~
Pull the mains plug 6 out from the wall
socket after every use.
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
• Place the device on a dry, level, non-slip
surface.
6. Before using for the
first time
1. Fill the kettle 2 up to the marking
MAX 1.7L on the water level display 3
and heat the water (see “Using the kettle”
on page 36).
2. Pour the water out and rinse out the ket-
tle
2
with fresh water.
3. Repeat this process. Then it is safe to
use the device.
7. Using the kettle
DANGER! Risk of injury
through scalding!
~
It is always necessary to close the lid 9
when heating water, as boiling water
may otherwise spray out!
~
Do not open the lid 9 while the water is
boiling.
~
Fill the kettle 2 only to the maximum fill-
ing level (
MAX 1.7L
), as boiling water
may otherwise spray out.
~
Do not bend over the kettle 2 when you
open the lid 9 and the contents are still
hot. There is a danger of being scalded
by escaping steam.
~
The kettle 2 becomes very hot during
operation. Only touch it at its handle 7
and only use the release button
8
and
the on/off switch 5 .
WARNING! Risk of material damage!
~
Fill the device with a minimum of 0.7 li-
tres of water, as otherwise the device
may overheat.
~
Never put alcohol, sugar or milk into
the kettle
2 !
Water as foodstuff
Water is a very sensitive foodstuff and can go
bad due to germs forming. Please take note:
• Always use fresh drinking water in the
kettle 2 .
• Pour water away, which has been
standing in the kettle 2 for longer than
approx. 1 hour.
• Do not reboil cooled down water.
Boiling water
1. Remove the kettle 2 from the device
base 4 .
2. Press the release button
8
to open the
lid 9 .
3. Fill the desired amount of fresh drinking
water into the kettle 2 . Keep it upright
BB&3(B:DVVHUNRFKHUB%ERRN6HLWH'LHQVWDJ2NWREHU