Silvercrest SWKL 2200 A1, Руководство по эксплуатации

Страница: 10 / 52

GB
│
IE
│
NI
│
CY
│
7 ■
SWKL 2200 A1
Cable retainer
A cable retainer is located on the base of the appliance. This winder
allows you to adjust the length of the cable to your local requirements.
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the cable through the corresponding gap in
the rear of the base for the sake of stability.
NOTE
► Always wrap the power cable around the cable retainer in a clockwise
direction. This reduces the length of the cable to a minimum, allowing you
to guide the cable through the gap in the base (see fig. 1).
Fig. 1
Connecting the power supply
CAUTION – PROPERTY DAMAGE!
► Before connecting the appliance, compare the connection data of the
appliance (voltage and frequency) on the rating plate with that of your
electrical supply. This data must correspond in order to prevent damage to
the appliance.
♦ Unwind the power cable from the cable retainer .
♦ Guide the power cable through the gap in the back of the base .
♦ Insert the plug into a mains power socket. You will hear a beep and all but-
tons will light up blue briefly.
When the jug is placed on the base , the
control lamp and temperature button 100°C will light up blue. The
appliance is now in standby mode for about 3 minutes. When the jug is
not on the base , the control lamp will flash blue.