SilverCrest SWKK 2400 A1
12 - English
WARNING
If the power cable (7) is not fed through one of the notches provided on the
underside of the base (6), the base (6) and kettle (3) will not be stable. The
movement of the boiling water could make the kettle tip over causing severe
damage to property and personal injury!
Open the lid (11) by pressing the lid release button (10).
"Minimum fill level" indicator
The minimum water fill level is 0.5 litres.
This low level is not visible on the outer
water level indicator (4).
A special mark indicating the exact
minimum fill level can be seen
inside
the kettle (3) while filling with water.
This mark inside the kettle (3) is visible
when the lid (11) is open. An additional
mark indicates approx. 0.7 l of water.
Fill the kettle (3) with drinking water, at least up to the "MIN 0.5L" mark inside and up to the
"1.7L MAX" mark on the water level indicator (4) and close the lid (11) by pressing it down
until it clicks into place.
When the kettle (3) is placed on the base (6), it can be freely rotated 360°
around the vertical axis. It does not need to engage in a certain position. This
allows you to rotate the kettle (3) such that you can easily check the water level
indicator (4) and rotate the kettle (3) so that the steam is directed away from
you.
Plug the mains plug into an easily accessible mains socket.
Place the kettle (3) on the base (6) and press the ON/OFF switch (8) down to switch the kettle
(3) on. The LED light ring (5) lights blue. The kettle (3) will make noises during the heating
process. This is not a malfunction.
DANGER: Risk of burns
Rotate the kettle (3) so that the steam is directed away from you. Otherwise
you could get burnt.
Only boil water with the lid (11) closed. Otherwise the kettle (3) could boil
over and cause burns and property damage.
Содержание SWKK 2400 A1
