5
GB
WARNING! Risk of material
damage
~
Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
~
Only use the original accessories.
~
Do not use any astringent or abrasive
cleaning agents.
4. Items supplied
1 tower fan
|
1
1 base (consisting of 2 parts)
|
8
1 screw
1 set of operating instructions
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
5. Assemble appliance
Before the device can be used, the base
|
8
must be screwed on:
1.
Figure A:
put the rear half of the
base
|
10
and the front half of the
base
|
11
together. Ensure that the con-
nection audibly clicks into place.
NOTES:
• The rear half of the base
|
10
can be
identified by the recess for the mains
power cable
|
9
.
• Ensure that the mains power cable
|
12
is
lying in the recess for the mains power ca-
ble
|
9
.
2.
Figure B:
place the tower fan
|
1
on
the base
|
8
. Ensure that it is standing
safely, and that the mains power ca-
ble
|
12
is lying in the recess for the mains
power cable
|
9
.
3. For safety reasons, screw the tower
fan
|
1
firmly onto the base
|
8
. For this
purpose, use the screw supplied.
4. Select a location which complies with
the safety instructions (see “Safety infor-
mation” on page 3).
5. Insert the mains plug
|
12
into a mains
socket corresponding to the technical
data.
6. Operation
6.1
Start and switch off the
appliance
1. Plug the power plug into a power sup-
ply socket which meets the technical
data requirements.
2. Switch on the power
supply by turning rota-
ry switch
|
2
to
ON
.
The appliance is now
operational.
3. Switch off the power
supply by turning rota-
ry switch
|
2
to
OFF
.
__CPE282343_TowerVentilator_B4.book Seite 5 Mittwoch, 7. Dezember 2016 8:39 20
