Silvercrest SSTB 10 C2, Инструкция по эксплуатации и правила безопасности

Страница: 30 / 146

GB
│
IE
│ 27 ■ SSTB 10 C2
Initial operation
Unpacking
♦ Remove all parts of the device and the operating instructions from the box.
♦ Remove all packaging material.
Check the package contents
(For illustrations see the fold-out page)
The following components are included in delivery:
●
Bluetooth ®
Speaker Tower SSTB 10 C2
● Mains adapter HP24E-1401700-AE
● Remote control
● 2 x 1.5 V batteries type AAA/micro
● Quick guide
● These operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► On delivery, the mains adapter and the remote control can be found in the
rigid foam packing directly under the lid of the box. Pull the rigid foam out
of the lid of the box to remove the mains adapter and the remote control.
► If the consignment is incomplete or damaged due to defective packaging
or carriage, contact the Service hotline (see the chapter
Service ).
Disposal of packaging materials
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging
material components for disposal if necessary.
The packaging material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTE
► If possible, keep the original packaging of the device during the warranty
period so that the device can be packed properly for returning in the event
of a warranty claim.