Silvercrest SSTB 10 B2, Инструкция по эксплуатации и правила безопасности

Страница: 15 / 44

■ 12 │
GB
│
IE
│
NI
SSTB 10 B2
Connecting a playback device
You can connect a wide variety of playback devices to this device, for
example MP3 or CD players . Please refer to the operating instructions of the
respective device . Switch off all devices before connecting them .
NOTE
► When playing back music via the AUX connections, the / PAIR ( + ),
( + ) and ( + ) buttons on the unit and the remote con-
trol are inactive . You can, however, turn the MUTE function on and off using
the button . Use the Play/Pause and skip functions on the external
playback device that you have connected .
► Before starting playback, set a moderate volume . When you reach the
maximum volume, you will hear a signal and the volume can no longer be
increased .
Connecting a playback device using a 3 .5 mm jack cable
♦ Connect the line-out connector of the external device (e .g . headphone socket)
via a 3 .5 mm jack cable to the AUX 1 socket on the rear of the device .
♦ To switch on the device, press the / FUNC. button or the button .
♦ Press the / FUNC. button on the device or the AUX button on
the remote control repeatedly until
AUX
appears on the display .
♦ Switch on the connected playback device and start playback .
Connecting a playback device using a cinch cable
♦ Connect the audio input jacks R and L on the rear of the device using
an audio cinch cable with the corresponding audio output sockets on the
external audio device . Make sure that the red and white colour markings
correspond .
♦ To switch on the device, press the / FUNC. button or the button .
♦ Press the / FUNC. button on the device or the AUX button on
the remote control repeatedly until
AUX
appears on the display .
♦ Switch on the connected playback device and start playback .
NOTE
► If both the AUX 1 socket and the AUX 2 socket are connected to
external playback devices, the music will be played back via the AUX 1
socket by default . To use the AUX 2 socket , simply disconnect the
3 .5 mm jack cable from the AUX 1 socket .