Silvercrest SSTB 10 B2, Инструкция по эксплуатации и правила безопасности

Страница: 10 / 44

GB
│
IE
│
NI
│ 7 ■ SSTB 10 B2
Initial operation
Unpacking
♦ Remove all parts of the device and the operating instructions from the box .
♦ Remove all packaging material .
Check the package contents
(For illustrations see the fold-out page)
The following components are included in delivery:
●
Bluetooth
® Speaker Tower SSTB 10 B2
● Mains adapter QXS24C-120200B
● Remote control
● 2 x 1 .5 V batteries type AAA/micro
● These operating instructions
NOTE
► Check the package for completeness and for signs of visible damage .
► On delivery, the mains adapter and the remote control can be found in the
rigid foam packing directly under the lid of the box . Pull the rigid foam out
of the lid of the box to remove the mains adapter and the remote control .
► If the consignment is incomplete or damaged due to defective packaging
or carriage, contact the Service hotline (see the chapter
Service ) .
Disposal of packaging materials
The packaging protects the device from damage during shipment . The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable .
Returning the packaging to the materials cycle conserves raw materials
and reduces the amount of waste that is generated . Dispose of
packaging materials which are no longer needed in accordance with
applicable local regulations .
NOTE
► If possible, keep the original packaging of the device during the warranty
period so that the device can be packed properly for returning in the event
of a warranty claim .