Silvercrest SSRM 20 A1, Руководство по эксплуатации

Страница: 18 / 58

SSRM 20 A1
■ 14 │
GB
│
IE
│
NI
Automatic station search and storage
NOTE
► To receive radio stations, you must connect the supplied
earphones . They function as a receiver antenna .
► Note that the automatic station search overwrites
stations that have already been stored .
♦ While the radio is on, press the MODE / button
for about 2 seconds to start the automatic station search .
The automatic station search always starts at the lowest
frequency (87 .5 MHz) .
The radio now scans the whole frequency range (87 .5–
108 MHz) for stations with a strong signal .
SCAN flashes
on the display .
When the radio detects a station, the display shows you the
station preset used (e .g .
) and the symbol goes
out briefly . As soon as you store the first detected station,
PRESET will be shown on the display permanently . The
detected stations are stored in the spaces to . Once
the entire frequency range has been scanned and all the
station presets have been filled, the automatic station search
is finished and the station saved in preset
is played .
♦ Press any button to terminate the search before it is
finished .
IB_312011_SSRM20A1_LB6.indb 14 19.12.18 14:33