14 GB/IE/NI
Close the cover of the dust collector
22
, making
sure that it audibly clicks into place, and insert
the dust collector
21
back into the product.
Close the cover
10
of the product, making sure
it audibly clicks into place.
Cleaning the brushes
Regularly remove any hair and dirt from the
side brushes
17
.
Cleaning the main housing
Clean the 3 anti-fall sensors
18
to maintain
their sensitivity.
Clean the front wheel
19
to remove any hair
tangled in it.
Clean the anti-collision sensor
20
to maintain
its sensitivity.
Replacing parts
Replacing the side brushes
If the side brushes
17
are worn out, they can be
replaced with the supplied replacement side
brushes
6
.
Loosen the old side brushes
17
fixed to the
underside using a cross-tip screwdriver (not
included in the delivery contents).
Screw the replacement side brushes
6
into
place.
Replacing the HEPA filter
Depending on the frequency of use, the HEPA filter
5
should be cleaned after approx. 15 to 30 days.
After approx. 6 months it should be replaced with
the supplied replacement filter.
Remove the old HEPA filter
5
(see chapter
„Cleaning and storage“).
Insert the new HEPA filter
5
.
Troubleshooting /
Problem solving
If the product is not working correctly, the display
1
will show various error codes and emit signal
tones of different lengths. Please refer to the table
below for troubleshooting.
After troubleshooting, press the Clean button on the
robot vacuum cleaner
11
or on the remote control
27
.
Problem
Possible
cause
Trouble-
shooting
No function.
Battery is not
fully charged.
Charge the
battery fully.
Power switch
9
switched to
“
O
”.
Switch the
power switch
9
to “
I
”.
Battery contacts
are dirty.
Clean the
charging con-
tacts
3
and
the battery
contacts on
the product.
Poor suction
power..
Suction vent
16
is blocked.
Check the suc-
tion vent
16
.
Dust collector
21
is full or the
filters
5
,
23
are blocked.
Proceed as
described in
the chapter
“Cleaning and
storage”.
Error code Possible
cause
Possible
trouble-
shooting
E01
Left side wheel
does not turn.
Check the left
side wheel
and clean it if
necessary.
E02
Right side
wheel does not
turn.
Check the right
side wheel
and clean it if
necessary.
E04
Product was
lifted up
Place the
product back
on the floor
