Silvercrest SSM 175 B2, Руководство по эксплуатации

Страница: 10 / 38

8
GB
1. Pull out the mains plug 7 .
2. If necessary, pull the blender jug 6 anti-
clockwise and pull it down and off the
blade assembly
4 .
3. Rotate the motor unit 1 right to the top
until it locks into place in this position.
4. Figure D: turn the rim of the blade as-
sembly 4 in a clockwise direction until
the arrow symbol shows to the opened
lock
13 and pull it up and off the mo-
tor unit 1 .
5. Clean the blade assembly with warm
water and a little detergent.
6. Let the blade assembly dry completely.
7. Place the blade assembly
4 on the motor
unit 1 . The arrow symbol shows to the
opened lock 13 .
8. Turn the blade assembly until the arrow
symbol shows to the closed lock. The
blade assembly is now correctly mount-
ed again.
8. Storage
DANGER for children!
Keep the
device out of the reach of children.
DANGER! In order to avoid accidents, the
mains plug 7 must never be connected to a
wall socket while in storage.
• Select a location where neither high
temperatures nor moisture can affect the
device.
9. Disposal
The symbol showing a wheel-
ie bin crossed through indi-
cates that the product requires
separate refuse collection in
the European Union. This ap-
plies to the product and all ac-
cessories marked with this symbol. Products
identified with this symbol may not be dis-
carded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Recy-
cling helps to reduce the consumption of raw
materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
10. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the
device yourself under any circum-
stances.
Fault
Possible causes /
Action
No function
• Has the device been
connected to the pow-
er supply?
• Check the connection.
• Is the blade assem-
bly 4 mounted proper-
ly?
• Has the blender jug
6
been engaged proper-
ly?
Blade assem-
bly
4 is turning
with difficulty or
not at all
• Switch off immediate-
ly, pull out mains
plug
7 and check:
Blockage in the vessel?
Liquids are
running out
• Is the quantity of ingre-
dients filled into the
blender jug too large?
GB_103371_Smoothie_Mixer.fm Seite 8 Mittwoch, 26. November 2014 11:54 11