■
56
│
GB
│
IE
SRH 5 B2
System menu (System)
NOTE
►
The system menu can be called up during operation and also in standby
mode .
►
If no setting is made in the system menu within 20 seconds, the device exits
the settings menu .
♦
Press the
INFO/MENU
button
4
for approx . 2 seconds .
♦
Press the
TUNE+
8
or
TUNE−
7
button (several times if necessary) or
turn the
VOLUME
|
ENTER / SCAN
dial
6
until
System
appears on
the display
1
.
♦
Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection .
Nap timer (NAP function)
Using the NAP function, you can set a timer alarm that will wake you up with an
alarm signal after 1–120 minutes .
Setting the nap timer
♦
Call up the system menu . The first menu item to appear is the
NAP
timer .
♦
Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection .
♦
Press the
TUNE+
8
or the
TUNE−
button
7
or turn the
VOLUME
|
ENTER / SCAN
dial
6
to set the alarm time in 1-minute steps
between
001
and
120
minutes .
♦
Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection
and start the nap timer . After exiting the system menu,
N
appears on the
display
1
followed by the remaining minutes or seconds .
♦
When the nap time has elapsed, an increasingly loud alarm sounds .
NAP
flashes on the display
1
and the set alarm time is displayed .
Deactivating the nap timer
♦
When the alarm goes off, press any button to end the timer .
NOTE
►
To turn off the timer before the end of the alarm time, call up the NAP func-
tion as described in the section
Setting the nap timer
. Set the alarm time
to
000
and press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm
the selection . The nap timer is now deactivated .