Silvercrest SRH 5 A1, Инструкция по эксплуатации и правила безопасности, Страница: 14 / 62

GB
│
IE
│
NI
│ 11 ■ SRH 5 A1
DAB+ radio operation (DAB)
Automatic station scan (AMS)
The automatic station scan with station saving scans the entire frequency band
once and automatically saves the DAB+ radio stations found as a
station list .
♦ This device must be switched on. If necessary, briefly press the button
2
to switch on the device.
♦ If necessary, briefly press
SOURCE /
3
several times until the DAB+
radio mode is shown on the display
1
.
♦ Briefly press the
VOLUME
|
ENTER / SCAN
dial
6
to start the
automatic station scan with station presetting. The display
1
now shows
the message Scanning... DAB and the number of found stations. The scan
progress is displayed as a progress bar. The DAB+ radio stations found
are automatically stored in the station list on order of increasing frequency.
When the scan is finished, the first station in the station list is automatically
played back.
NOTE
► An automatic station scan with station saving may overwrite an existing
station list.
Selecting stations
♦ Press the
TUNE+
8
or
TUNE−
button
7
to select a DAB+ radio station
from the station list. After approx. 2 seconds, the displayed station is auto-
matically played back.
Saving stations manually
♦ Press the
TUNE+
8
or
TUNE−
button
7
to select a DAB+ radio station
from the station list.
♦ Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection.
♦ Press the
PRESET
button
5
. The display
1
shows the preset space with the
last selected radio station (if radio stations have already been stored). If no
radio stations have yet been stored, the display
1
shows Preset 1 empty .
♦ Press the
TUNE+
8
or
TUNE−
button
7
to select the desired preset.
♦ Press the
VOLUME
|
ENTER / SCAN
dial
6
, to store the station in
the selected preset. The preset space of the stored station is shown in the
upper right corner of the display
1
(e.g. P1 for preset 1).
NOTE
► Any previously stored stations will be overwritten.