■
6
│
GB
│
IE
SRBN 5 A1
Operation
Check the package contents
(See fold-out page for illustrations)
The scope of delivery includes the following components:
▯
Bluetooth
®
radio
▯
These operating instructions
♦
Remove all parts of the device from the packaging and remove all packaging
materials.
NOTE
►
Check the package for completeness and for signs of visible damage.
►
If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the Service hotline (see chapter
entitled
Service
).
Disposal of packaging materials
The packaging protects the device from damage during transport. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
Set-up location requirements
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
■
Place the device on a firm, flat and level surface.
■
Do not operate the device in a hot, wet, extremely damp or explosive environment.
■
Keep a minimum distance of 30 cm to heat-emitting devices such as heaters,
ovens, etc.
■
Operate the device only in locations with adequate ventilation.
■
The surfaces of some items of furniture might contain components that can corrode
and soften the rubber feet of the device. If necessary, place a mat under the
device’s rubber feet.
■
The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
