SilverCrest SMT 3 A1
50 - English
•
Turn the multi-trimmer on.
•
Position the beard contour trimmer (9) perpendicular to
the skin and move it slowly and evenly, alternating in and
against the direction of hair growth. Repeat this process
until the desired trim is obtained.
9. Cleaning/maintenance
•
Always turn the multi-trimmer off before cleaning.
•
Do not use abrasive or corrosive cleaning agents. The
surfaces of the multi-trimmer can be damaged.
•
Never immerse the trimmer housing (3) in water for
cleaning. It could be irreparably damaged.
•
Use the cleaning brush (7) to remove hair from the blades
(12, 13, 15).
•
After cleaning, put a few drops of acid-free oil on the
blades (12, 13) of the eyebrow trimmer attachment (5)
and bear contour trimmer (9) every so often.
9.1 Base (6)
•
Clean the base (6) with a dry or slightly damp cloth.
9.2 Trimmer housing (3)
•
Remove all attachments (2, 5, 9) and clean the trimmer
housing (3) with a dry or slightly damp cloth.
