9
SMP 6200 A1
GB
WARNING - RISK OF INJURY
At too high speeds and with a too heavy pressure, the sapphire
miller can quickly penetrate into deeper, healthy skin layers.
This can cause injury and damage to the periosteum!
Always take care and a cautious approach when removing corns. If in
►
doubt, consult a pedicurist, podolgist or a dermatologist.
To remove corns, mill very carefully and slowly at low speed with the round
sapphire cutter
w
.
Under no circumstance should you use undue pressure, otherwise you could
rapidly penetrate healthy skin and injure it.
Working with the appliance
WARNING - RISK OF INJURY
Too long and too intensive treatment can also injure deeper
layers of skin.
Therefore regularly check the treatment progress and results. Diabetics
►
in particular are less sensitive on the hands and feet.
NOTICE
The attachments show only a reduced eff ect with softened skin. Therefore do
►
not carry out any pretreatment in a water bath before using the appliance.
Find a well-lit place to work. A mains power outlet must be posi-
1)
tioned in close proximity.
Insert the appropriate attachment for your purpose in the attach-
2)
ment acceptor
1
. The attachment must sit securely.
Insert the power adapter
3)
4
into a mains power outlet.
Slide the on/off /direction switch
4)
6
into the desired direction.
The appliance runs with the lowest speed.
NOTICE
Always select the direction of run so that you can treat the nails in their
►
direction of growth. Where possible, treat the nails from the outside to-
wards the inside (to the nail tip). Otherwise, the nails split more easily.
If you feel that the nails could tear during treatment, select the other
►
direction of run.
IB_46740_SMP6200A1_LB4 9
IB_46740_SMP6200A1_LB4 9
06.12.2011 10:50:21 Uhr
06.12.2011 10:50:21 Uhr