Silvercrest SMA 500 B1, Инструкция по эксплуатации и правила безопасности

Страница: 12 / 78

SilverCrest SMA 500 B1
10 - English

If you find visible damage on the milk frother or the power
cable (12), switch off the milk frother immediately, remove
the plug from the socket and contact the service department
(see ‘Warranty information’ section).

Only plug the base (11) into a power socket that is properly
installed and easily accessible and whose mains voltage
corresponds with the rating plate specifications. Following
connection, the power socket must continue to be easily
accessible so that the plug can be quickly removed in an
emergency.

Never immerse the base (11) or the canister (7) in water or
any other liquid. If liquid enters into the base (11), remove
the plug from the socket and contact the service department
(see ‘Warranty information’ section).
DANGER of fire
Fill the canister (7) up to the MIN marking with milk. If you do
not pour in enough milk, there is a risk of fire due to
overheating.
5. Copyright
All contents of these operating instructions are subject to copyright law and are provided to the
user solely as a source of information. Any form of copying or reproduction of data and information
without the express written permission of the author is prohibited. This also concerns commercial use
of the content and data. The text and illustrations correspond to the technical standards at the time
of printing. Subject to alterations.