![Silvercrest SLE 320 C4 Скачать руководство пользователя страница 23](http://html.mh-extra.com/html/silvercrest/sle-320-c4/sle-320-c4_operating-instructions-manual_386543023.webp)
■
20
│
GB
│
IE
│
NI
SLE 320 C4
Protection against overheating
The appliance has an overheating protection. It switches off automatically if
there is a risk of overheating and switches back on once the appliance has fully
cooled down. The appliance cannot be used during the cool-down phase.
♦
Check whether external conditions may have triggered the overheating
protection (e.g. temperatures above 35°C or a closed air outlet flap
).
Storage
♦
Remove the plug from the mains power socket. Roll up the mains cable
loosely and wrap the Velcro around it so that it does not become a tripping
hazard.
♦
Empty the water tank
if you are not going to use the appliance for a
long time.
♦
Always store the appliance in an upright position and in a dry and dust-free
environment without direct sunlight.
Troubleshooting
This section contains important information on fault identification and rectification.
Causes of malfunction and fault rectification
The following table will help you to identify and rectify minor malfunctions:
Fault
Possible cause
Remedy
The appliance
will not switch
on.
The plug is not plugged in.
Insert the plug into the mains power
socket.
The mains power socket is not
supplying power.
Check the house mains fuse.
Safety stop due to missing or
incorrectly inserted water tank
.
Insert the water tank
correctly.
The water tank
is full.
Empty the water tank
and reinsert it.
The appliance
stops occasion-
ally (the fan
switches off).
The automatic defrosting function
is activated.
This is a normal feature of the
appliance.
The humidity of the room has
reached the desired level.
This is a normal feature of the
appliance.
The appliance
is producing
no or too little
condensate.
The air inlet or air outlet openings
is contaminated or obstructed.
Ensure that the air inlet and air
outlet opening are clean and
free of obstructions.
The room's windows and doors
are open.
Close the windows and doors.
The appliance is running in the
AIR CLEAN
programme.
Dehumidification is not taking place.
Select another programme, such
as
TARGET HUMIDITY
.