7
SKMP 1300 B3
GB
IE
Working with the kneading
hook, beater and whisk
WARNING! RISK OF INJURY!
►
Under no circumstances should you place
your hands or fingers in the mixing bowl
during operation! Danger of injury due to
rotating parts!
►
Switch from one accessory to another only
when the drive unit is at a complete standstill!
After being switched off, the drive continues
to run for a short time.
►
In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
CAUTION – PROPERTY DAMAGE!
►
When working with kneading hooks
,
whisk
-
or beater
3
, we recommend
allowing the appliance to cool down after
10 minutes of operation.
NOTE
►
When you are working with the kneading
hook
, whisk
-
or beater
3
, the drive unit
lid
1
must be in place. If not, the appliance
will not start.
To prepare the device for tasks involving the knead-
ing hooks
, whisk
-
or beater
3
, proceed as
follows:
1) Push the release lever
upwards and move
the swivelling arm
to the highest position.
2) Insert the mixing bowl
so that the locking
mechanisms on the mixing bowl
fit into the
recess in the base
. Rotate the mixing bowl
clockwise (cf. symbols
and
on the
base
) until it is locked and stable.
3) Depending on type of application, mount either
the kneading hook
, whisk
-
or beater
3
onto the drive shaft
:
–
Place the kneading hook
, whisk
-
or
beater
3
onto the drive shaft
so that
both metal pins on the drive shaft
fit into
the recesses in the inset
-3
.
–
Push the inset
-3
firmly onto the drive
shaft
until the spring is compressed while
rotating the inset a little anticlockwise (direc-
tion
).
–
Let go of the inset. It is now firmly attached
to the drive shaft
.
4) Add the ingredients you wish to process to the
mixing bowl
.
NOTE
►
Please note that the dough in the mixing bowl
will increase in volume or will be pressed
upwards by the movement during the kneading
or mixing process. Therefore, never fill the
mixing bowl
to the brim!
5) Push the release lever
upwards and push
the swivelling arm
into its working position
with the mounted inset facing downwards.
6) Push the lid
onto the mixing bowl
.
IB_113373_74_SKMP1300B3_SE_DK_BE_NL.indb 7
29.06.15 15:03
DIN A5 148 mm x 210 mm
Содержание SKMP 1300 B3
Страница 3: ...B A ...
Страница 4: ...C ...