SKBL 56 A1
■
8
│
US-EN
♦
Press and hold the button for about 2 seconds to turn a speaker
on and activate the
Bluetooth
®
function . You will hear a beep and the
operating/charging LED will flash orange und blue .
Make sure that the speakers are no more than 32 ft from the
Bluetooth
®
device and each other. Make sure that there are no barriers or electronic
devices placed between them.
♦
Select
SKBL 56 A1
from the list of found devices on your
Bluetooth
®
device to pair the two devices . You will hear a short beep when the connec-
tion has been established successfully . The operating/charging LED will
flash twice in 3 second intervals .
♦
If you want to operate the second speaker in mono mode with a different
Bluetooth
®
playback device, carry out the process described above with
the second speaker . Make sure you do not turn on the second speaker until
you have paired the first speaker with a
Bluetooth
®
playback device .
You can now use the speaker wirelessly to listen to your favourite tunes .
The next time you turn on the speakers, they will connect automatically to the
most recently connected
Bluetooth
®
device. If your
Bluetooth
®
device
does not automatically reconnect, you will have to re-establish the connection
manually. A detailed description of how to do this can be found in the oper-
ating instructions for your
Bluetooth
®
device.
If you want to connect the speaker to another
Bluetooth
®
device, you must
first unpair the current
Bluetooth
®
device. To do this, hold down the
button and the button (
)
of the affected speaker for about
2 seconds until you hear a beep. Alternatively, you can terminate the connec-
tion on your
Bluetooth
®
device. In this case, you will also hear a beep.
IB_282774_Bluetooth_SKBL56A1_LB9.indb 8
16.01.17 11:27