Silvercrest SHM 600 A1, Руководство по эксплуатации

Страница: 74 / 94

Handling and operation
71 SHM 600 A1
GB
Setting the Scan Resolution
♦ Press the button DPI to choose between either the high
resolution (HIGH = 600 dpi) or the low resolution (300 dpi =
LOW). In the display either HIGH or LOW is indicated.
Setting the Scan Mode
♦ Press the button C/BW to choose between either the colour
mode (COLOR) or the black / white mode (MONO). In the
display either COLOR or MONO is indicated.
Scanning
NOTICE
► To scan, please ensure that the appliance is not connected
to a computer and the Micro-SD memory card is inserted.
♦ Switch the appliance on with the button
/SCAN
.
♦ Place the document on a fl at surface and hold it down fi rmly
with one hand.
♦ Place the appliance on the edge of the paper. Ensure that the
scan area between the markings for the scan width ( ),
which are marked on the side of the appliance, is maintained.
♦ Hold the appliance pressed fl at against the document and press
the button
/SCAN once. The LED SCAN glows.
♦ Proceed slowly with the appliance over the document whilst
keeping your hand steady, so as to achieve the best quality for
the scanned document.
♦ Press the button /SCAN once again to stop scanning.
NOTICE
► To conserve the batteries, the appliance switches off auto-
matically after 3 minutes of not being in use.
Buch_73767_LB2.indb 71 Buch_73767_LB2.indb 71 22.03.12 16:59 22.03.12 16:59