
SHI 1.5 A1
GB
│
IE
│
NI
│
7
■
Preparations
Removing/attaching brush pads
You will have to remove the brush pad
to insert batteries
or
to clean the brush pad
.
1) To remove the brush pad
press the release
towards
and retain it in this position.
2) At the same time, pull the brush pad
upwards on the side
where the release
is located.
3) You can now completely remove the brush pad
.
4) To replace the brush pad
again, press both catches
into
the recesses on the hand unit
.
5) After this, press the other side down so that the lock
engages.
The release
must then be in the position.
_290971_SHI1.5A1_LB6.indb 7
21.07.17 09:2