SFA 40 A2
■
22
│
GB
│
IE
│
NI
Changing the fuse in the car charger adapter
There is a fuse in the car charger adapter
to protect the vehicle’s
on-board power supply. If the device no longer works, check the fuse
and replace if necessary.
♦
Open the car charger adapter by turning the screw insert
(C) carefully anticlockwise with a pair of pliers and carefully
removing it.
♦
Remove the plug tip (B) from the fuse (A) and pull out the fuse.
♦
Now insert a new type F2AL 250 V fuse into the car charger
adapter , fit the plug tip (B) onto the slightly protruding end
of the fuse and screw the previously removed screw insert (C)
back in.
DANGER
►
Replace the fuse only with another of the same type. Fuses
with a different rating could cause a fire.
NOTE
►
If the device still does not work or the fuse blows again im-
mediately, the device is defective. In this case, please contact
the Service Hotline (see section "Service").
Содержание SFA 40 A2
Страница 3: ......