Silvercrest SFA 4.1 D1, Инструкция по эксплуатации и правила безопасности

Страница: 43 / 186

SilverCrest SFA 4.1 D1
English - 41
The name of the hands-free kit ‘SFA 4.1 D1’ will now appear in the list of devices connected to your mobile phone.
The hands-free kit is now in standby mode and buttons 1, 2, 7 and 8 flash blue briefly once at regular intervals of
approx. 3 seconds. Once the connection is lost, they flash blue twice at intervals of approx. 3 seconds.
You can pair or connect other devices to the hands-free kit in a similar manner. The pairing begins for each device with
the hands-free kit switched off as described above.
Once you have connected a device to the hands-free kit, switch the hands-free kit off and then on again. The pairing
process is now complete.
The hands-free kit then has several ‘known’ devices. This status is a prerequisite for an active connection between the
hands-free kit and other devices. A maximum of 8 devices can be stored as ‘known devices’. As soon as a ninth device
is added, the oldest device is removed.
The number of devices that can establish an active connection with the hands-free kit is limited to two. The second
device must be connected within 10 minutes of the first device. A connection can then be re-established automatically
with the second device when the hands-free kit is switched off and on again. If one or two of the known devices enter
the vicinity of the hands-free kit within approx. 10 minutes, a connection to these devices will be established
automatically. You may need to confirm the connection on your mobile phone. If a third known device enters the
vicinity of the hands-free kit, the connection with this device will be blocked as long as there are two active connections
or until one of the two devices goes out of range. If one of the two actively connected devices disconnects, pairing is
possible for the third (waiting) device once the hands-free kit is restarted.