21
GB/IE
NOTE:
The LED
6
will flash red whilst
charging. Once the battery is charged,
above 50 % battery capacity the LED
6
will light up green.
Once charging has completed, remove the
micro-USB plug from the headphones.
Battery capacity indicator:
LED indicator
status
Battery capacity
Solid green color 51 % to 100 %
Solid amber color 26 % to 50 %
Solid red color
less than 25 %
Flashing red color Battery is charging.
Using the headphones
Connect the headphones with a communi-
cation device.
Place the headphones near a switched on
communication device (e.g. mobile or
computer).
Pairing with a new Bluetooth
®
device: Hold
the On / Off button
13
for approx. 4 seconds
until the LED
7
flashes white. This indicates
the headphones are now ready to connect
mode, which remains active for 5 minutes.
The headphones will switch off if they do not
detect a Bluetooth
®
device to connect to.
Now connect your communication device
(mobile phone or computer) via Bluetooth
®
with the headphones. Please refer to the
notes in the instructions for your communica-
tion device. Select the entry “SBKL 40 A1“
from the list of devices detected by your
computer or mobile.
Once the connection has been established,
the LED
7
will flash white for 5 seconds.
After that the LED
7
will turn OFF.
Please note, your communication device
must support Bluetooth
®
Standard 4.1 to
use all options.
You may need to approve the connection
on the communication device. Please refer
to the instructions for use of the communica-
tion device on this topic!
The headphones may be manually switched
off by holding the On / Off button
13
for
4 seconds until the LEDs
6
and
7
go.
Bluetooth indicator:
LED indicator
status
Headphone state
Flashing white
Pairing mode
Solid white
(5 seconds) and
then turn OFF
Paired
Connecting the headphones
to a second Bluetooth
®
device
The headphones may be connected to two
Bluetooth
®
communication devices at the same
time. If the headphones are already connected
to a device, follow the steps below to connect
to the second device:
Activate multipoint mode by pressing and
holding Bluetooth button
8
for 2 seconds.
The first communication device (mobile phone
or computer) is disconnected.
Now connect to the second communication
device via Bluetooth
®
with the headphones.
Please refer to the notes in the instructions
for your communication device. Select the
entry “SBKL 40 A1“ from the list of devices
detected by your computer or mobile. The
second communication device is connected.
Select the entry “SBKL 40 A1” from the list
of devices detected by your first communi-
cation device / computer. Now, both com-
munication devices are connected to the
headphones simultaneously.
After connected the headphone with 2
Bluetooth devices, you can playback music
via either one of device.
Содержание SBKL 40 A1
Страница 4: ......
