Silvercrest SAS 7.4 LI B2, Руководство по эксплуатации

Страница: 23 / 28

■ 20 │
GB
SAS 7.4 LI B2
Charging
NOTE
► Check to ensure that the on/off switch
6
has been pushed back (to the
position "0 ) before starting the charging process.
■ Place the handheld vacuum cleaner from above into the wall bracket
3
so
that the barrel plug
5
slips into the socket on the handheld vacuum cleaner.
The charge indicator lamp
7
lights up red and the charging process begins.
■
Important:
The charge indicator lamp
7
lights up green once the handheld
vacuum cleaner is charged enough to vacuum again. This does not mean that
all the batteries are completely charged. When the charge indicator lamp
7
lights up green, the batteries are charged to around 80%.
■ When charging is complete, which can take around 5 hours with fully dis-
charged batteries, the appliance automatically switches to a trickle charge
(maintenance function). Nevertheless, in order to avoid possible damage
to the batteries, do not leave the appliance permanently connected to the
mains adapter
4
.
■ Do not recharge the batteries again until the handheld vacuum cleaner's
suction power becomes appreciably weaker and the charge indicator lamp
7
fl ashes green.
NOTE
► The handheld vacuum cleaner can also be charged directly via the mains
adapter
4
. To do this, remove the barrel plug
5
with a slight twist from the
wall bracket
3
and insert it into the socket on the handheld vacuum cleaner.
Operation
CAUTION!
► The suction opening must always be open and may not be blocked. Block-
ages lead to overheating and damage to the motor.
NOTICES
► Make certain that the dust fi lter 0 is always inserted before using the
appliance.
► When vacuuming liquid, do not exceed the MAX marking in dirt container
q
.
IB_275064_SAS7.4LiB2_LB1.indb 20 09.03.16 12:01