Silvercrest SAS 7.4 LI B2, Руководство по эксплуатации

Страница: 22 / 28

GB
│ 19 ■ SAS 7.4 LI B2
2) The batteries reach their full capacity after a charging time of 24 hours. For
care of the batteries, we recommend the following: Once the batteries have
been charged, disconnect the mains adapter
4 from the mains socket. Do
not reconnect the mains adapter
4
with the mains socket until the handheld
vacuum cleaner's suction power has noticeably decreased.
Installation of the wall bracket
DANGER – ELECTRIC SHOCK!
► Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket
3
.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug
5
of the mains adapter
4
into the wall bracket
3
as
shown in the diagram. Secure the barrel plug
5
by turning it.
2) Select a suitable installation location for the wall bracket
3
:
It must be possible to remove the handheld vacuum cleaner easily and there
must be an accessible mains power socket for the mains adapter
4 .
3) Drill two holes about 61 mm apart. Use the wall bracket
3
to mark the holes,
to ensure the correct spacing. The drill holes must be suitable for 5 mm wall
plugs.
4) Push the wall plugs into the holes and then screw the wall bracket
3
fi rmly
into place using the screws.
5) You can place the nozzles on the accessories holder on the side.
6) Connect the mains adapter 4 to a mains power socket.
IB_275064_SAS7.4LiB2_LB1.indb 19 09.03.16 12:01