SilverCrest Wireless Headphones RFH 1863
English - 13
Receiving Radio Stations
You may toggle the operation mode of your headphones to radio reception at
any time.
Power the headphones on by pressing the On/Off button (13) once. The
power indicator (11) will light orange.
Slide the mode selection switch (7) of your headphones to the “FM”
position. The radio reception indicator (8) will light orange while no radio
station has been tuned-in. It will light green as soon as a station has
been properly tuned in.
Press the Search button (5) on the headphones once to switch to the
next available station.
Each press of the Search button will toggle to the next available station
until the end of the FM band has been reached. After this, the scan will
cycle back from the beginning of the FM band.
The FM signal reception depends on environmental
conditions. If the desired station cannot be received
without noise or interference, try to change your location.
The last tuned-in station will not be saved when changing
the operating mode.
To use the built-in FM tuner it is not necessary to power
the transmitter cradle on. You may turn it off by press the
On/Off and selection button (1).
