63
GB
16. Malfunctions, Cause, Remedy
16.1 Malfunctions during operation
Malfunction
Cause
Remedy
Device does not start.
Blender jug
5
is not posi-
tioned correctly
Insert blender jug
5
correctly (see
“Insert blender jug” on page 53).
Lid
32
or deep steamer bas-
ket
3
have not been placed
correctly onto the blender
jug
5
.
Place lid
32
or deep steamer bas-
ket
3
correctly.
No power supply
Check mains plug
7
, main
switch
6
and possibly the fuse.
Liquid underneath the
device
The blade assembly
27
has
not been inserted correctly so
that the blender jug
5
is leak-
ing.
Insert blade assembly
27
correctly
(see “Using and removing the
blade assembly” on page 52).
Seal
26
for the blade assem-
bly is defective.
Insert new seal
26
(see “Clean-
ing, checking and replacing seals”
on page 61).
Liquid escaped from the
blender jug
5
flowing onto
the surface through the over-
flow hole
10
of the base
unit
12
. (see “Overflow” on
page 51)
When mixing liquids at speed 10
or with button
TURBO
18
, the
blender jug
5
must not contain
more than 1 litre, since otherwise
liquid may be ejected. For speed
settings of less than 10, the blend-
er jug
5
may only be filled up to a
maximum of 2.2 litres.
Liquid escapes at the
lid
32
of the blender
jug
5
Seal
31
has not been inserted
correctly.
Insert seal
31
correctly (see
“Cleaning, checking and replac-
ing seals” on page 61).
Seal
31
is defective.
Insert new seal
31
(see “Clean-
ing, checking and replacing seals”
on page 61).
No temperature can be
set.
A speed setting 4 - 10 was se-
lected.
Select speed setting 0 - 3 (see “Set-
ting the speed” on page 50)
Parts of the device are
discoloured.
Certain food or spices (e.g.
curry) may discolour plastic.
This is not a defect with the de-
vice
Remedy unnecessary, since not
harmful to health.
A speed setting ex-
ceeding 3 cannot be
selected.
A temperature has been set.
Set temperature to
0
.
BB&3(B)5ERRN6HLWH)UHLWDJ-XQL