background image

3

Important Safety Instructions

EN

Important Safety Instructions

Before you use this device for the first time, please read the following notes in this manual and heed 

all warnings, even if you are familiar with handling electronic devices. Keep this manual safe for fu

-

ture reference. Keep it near the product. If you sell the device or pass it on, it is essential you hand 

over this manual also.

This icon denotes important information for the safe operation of the product and for 
the user’s safety.

This symbol denotes further information on the topic.

Warning: Notice on Mains Separation

The main power switch does not fully disconnect the device from the mains. Furthermore, the device 

consumes electricity in the Standby mode. In order to completely disconnect the device from the 

mains, the power plug must be pulled out from the wall outlet. For this reason, the device should be 

positioned in such a way that assures unobstructed access to the wall outlet so that the power plug 

can be immediately pulled out in an emergency situation. To avoid the danger of fire if the device is 

not going to be used for a long while (e.g. during holidays), it should always be disconnected from 

the power socket. Before stormy weather when there is the danger of lightning, disconnect the de

-

vice from the power supply and pull out the antenna plug.

Warning: Batteries

Insert the batteries with the correct polarity. Never try to recharge the batteries and under no cir

-

cumstances throw them into fire. Do not mix batteries (old and new or carbon and alkaline, etc.). 

Remove batteries when the device is not to be used for a long time. Non-intended use may cause 

explosion and danger to life.

Respect the environment. Old batteries do not belong in with domestic waste. They must be handed 
in to a collection point for old batteries.

Warning: Cables

Always hold cables by the plug and never pull on the cable itself. Never place the device, heavy 

objects or furniture on the cable and take care that the cord does not become trapped, especially 

at the plug and socket. Never make knots in the cable and do not tie it together with other cords. 
All cables should be positioned so that nobody can trip over them or be obstructed by them. Never 

use adapter plugs or extension cables that do not comply with the current safety regulations in your 

country, and do not modify any of the cables yourself.

Danger: Children and Persons with Disabilities

Electrical appliances do not belong in the hands of children. People with disabilities should only use 

electrical devices in appropriate circumstances. Do not allow children or persons with disabilities 

to use electrical devices when not under supervision. These may not comprehend the presence of 

potential risks. Batteries and small parts represent potential choking hazards. Keep the batteries in 

a safe place. If a battery is swallowed, seek medical help immediately. Keep the packaging away 

from children and persons with disabilities too as there is danger of suffocation.

Содержание LT 2310




















































Отзывы: