SilverCrest SBTH 4.1 A1
- 17
First use
Powering the headphones on/off
Power the headphones on by pressing the ▸ll button (2) for about 4 seconds.
The LED (8) now flashes orange indicating Standby mode. With the
headphones are being powered on for the first time and they have never been
connected to a device before, Pairing mode starts automatically. In Pairing
mode, the LED (8) flashes blue and orange alternately. See the next section for
connecting your device.
Press the ▸ll button (2) for about 4 seconds to power the headphones off
again. The LED (8) flashes orange several times while powering off.
Connecting the headphones
Proceed as follows to connect the headphones to your device:
Power off the headphones.
Press the ▸ll button (2) for about 6 seconds to start Pairing mode.
The LED (8) now flashes blue and orange alternately. The headphones are
now in Discovery mode. In Discovery mode, you can connect a compatible
device to the headphones using the Bluetooth
®
function.
Now connect your smartphone or audio/media player to the headphones
using Bluetooth
®
. To do this, follow the user manual of your smartphone or
media player. Select the SBTH 4.1 A1 device from the list of discovered
devices and make the connection. If you are asked for a PIN, enter “0000”.
Once the connection is made, the LED (8) flashes blue once briefly about every
4 seconds. Once your device is powered off or is out of range, the
headphones go into Standby mode (not connected) and the LED (8) flashes
blue quickly.
If you want to connect a different device to the headphones, you must repeat
the pairing process as described previously.
