SilverCrest SBTH 4.1 A1
16 -
Before using
Charging the battery
Before you start using the device or if the built-in battery is drained, do the
following:
Connect the USB charging cable (B) to the USB charging connection (7) and
to an unused USB port of your powered computer or a USB power adapter
(not included).
The LED (8) is orange while charging. Once the battery is completely
charged, the LED (8) turns blue.
When the battery charge is low, the LED (8) flashes orange once every 20
seconds and 4 beeps sound at the same time.
Keep in mind that the battery will only reach full capacity after
4-5 complete charge/discharge cycles.
Acoustic signals
The headphones will signal acoustically for certain events. You can see these
signals in the following table:
Event Acoustic
signal
Powering on
Tune
Powering off
Tune
Successful pairing
Tune
Bluetooth
®
connection made
Tune
Incoming call
Ring tone
Minimum volume reached
Beep
Maximum volume reached
Beep
Low battery
Every 20 seconds, 4 beeps sound
