- 6 -
2. Press the buttons UP
/DOWN
1(
/
l
to set the date at day intervals. Pressing
and holding the buttons changes the date
at intervals of 10 days.
3.
Press the button MODE/
j
once
again to save the date and to switch to
setting the memory function.
If you later press the DOWN button
l
in
automatic mode, the display
o
briefly shows
"DAY". Subsequently, the time and date dis
-
play alternate themselves. To switch back to
an exclusive time display, press the button
DOWN
l
once again.
Setting the memory functions
You can programme in up to 6 dates, which
the appliance will remind you of when they
are reached.
1.
In automatic mode press the button
MODE/
j
three times. The display
o
shows alternatively a date and the
SDA 1 indicator for reminder date 1.
2.
Press the buttons UP
/DOWN
1(
/
l
to set the first desired reminder date. As
the earliest possible date you can set the
following day. Pressing and holding one
of the buttons changes the display in ten-
minute intervals.
3.
When you press the button TIMER
g
, the
year number is deactivated and thus you
are reminded on this date every year.
4.
Should you wish to programme in further
SDA's, press the button MEM SCAN
f
to
select the desired memory positions 2-6.
The selected memory location (SDA 2-6)
will be indicated in the display
o
.
5. Follow the same steps with the other
dates.
6. To deactivate the memory function, pro
-
gramme in a date that lies in the past.
7.
Press the button MODE/
j
once
again to save the settings of the memory
function and to switch to setting the up-
date function.
The appliance will remind you of a date
that you have set with the reminder function.
Then, on this given day from 08:00 – to
23:00, and on every full hour, the acoustic
reminder alarm sounds for 10 minutes if you
do not stop the alarm. In addition, the SDA-
panel in the display
o
blinks. To stop the
reminder alarm, press any button.
Setting the update function
Using this function, the appliance can auto
-
matically update the settings for the clock
based on the RDS data.
1.
In automatic mode press the button
MODE/
j
four times. The display
o
shows "
UP DATE
".
2.
Press the button DOWN
l
, to deacti
-
vate the actualisation function. The blink-
ing clock symbol
in the display
o
then
disappears.
3.
Press the button UP
1(
to reactivate the
update function. The hour symbol
ap-
pears.
4.
Press the button MODE/
j
once
again to save the settings of the update
function (the display flashes for 15 sec
-
onds, after that the saving is finalised)
and to switch to setting the 12 or 24 hour
mode.
Setting the dimmer function
In automatic mode press the button MODE
/
j
five times. Or press and hold the
button DIMMER/AOT
i
to set the dimmer
function outside of the Settings menu. In the
display
o
appears either
DIM ON
(delivery
state) or
DIM OFF
. Press and hold the button
DIMMER/AOT
i
once again to change the
dimmer setting.
DIM ON: The display
o
lights up for 15 sec
-
onds when a button is pressed.
DIM OFF: The display
o
is permanently lit.
BDA_KH 2398 - DT-49029_6_uk.indd 6
22.06.2010 17:28:47