- 50 -
Remote control
3^
POWER/DIM
: Switch device on and off/
dim display illumination
3&
SEL
: Access settings for volume, bass, treble,
balance and fader
3*
/
: Title/station search backwards/forwards
3(
MODE/LOUD
: Set operation mode/loudness
function
4)
VOL+/-
: Volume increase/decrease
4!
AS/PS/MP3
: Automatic station memory/
MP3 search
4@
6/D-UP
: Station button 6/next directory
4#
5/D-DN
: Station button 5/previous directory
4$
TA/TP
: ("Traffic Announcement"): Activate traffic
radio station
4%
PTY
: ("Program Type") Search for station by PTY
group
4^
Battery compartment
4&
MUTE
: Switch off sound
4*
DISP
: Show display information
4(
SCAN/REC
: Automatic station search/Record to
a data carrier at the USB port or the
SD/MMC card slot
5)
RDM/4
: Random playback in the
CD/MP3/WMA operation mode/
number button 4
5!
INT/3
: Intro function in the CD/MP3/WMA
operation mode, number button 3
5@
RPT/2
: Repeat function in the CD/MP3/WMA
operation mode/ number button 2
5#
PAU/1
: Playback start or stop/ number button 1
5$
BAND/ENTER
: Select band range/confirm selection
Case for face plate
Key for installation bracket
Bezel frame
Installation bracket
H
G
F
E
D
Installation
If you want to install your car radio yourself follow
the installation and connection instructions in this
manual.
Installation instructions
• Try connecting the cable to perform a function
test before finally installing the device. Make
sure that it is plugged in properly and that the
system functions correctly.
• Insert the device in the slot provided for it or select
a location for mounting the device that does not
obstruct the driver during normal operation of
the vehicle.
• In the event that changes to the vehicle are ne-
cessary contact your vehicle dealer/qualified
radio installation facility.
• Install the device in such a way as to avoid injuries
in the event of harsh braking.
• If the device is installed with more than a 30° in-
clination it could lead to function disorders.
• Avoid installation of the device in the vicinity of
high temperature sources (i.e. direct sunlight or
heating vents) or dusty and dirty locations. Do
not subject the device to excessive vibration.
Connection
Note:
Make sure that a permanent positive connection
is applied to the station memory of connection
7 in the ISO block A.
You can connect an external amplifier to the
audio cinch output LINE OUT or an external
sound source to the audio cinch input LINE IN.
When doing so, please follow the operating
instructions of the external amplifier/sound
source.
IB_KH2381_41164_LB5 14.11.2008 9:19 Uhr Seite 50