Silvercrest KH 2316, Руководство по эксплуатации

Страница: 4 / 42

- 2 -
Intended use
This micro system is intended exclusively for the playback of
audio CDs, MP3-CDs, CD-R, CD-RW, audio cassettes and for
the playback of radio programmes. Additionally, the micro
system is suitable for the recording of audio cassettes. The
micro system is not intended for use in commercial or industrial
environments.
No warranty claims will be granted for damage resulting from
improper use!
Items supplied
1 Micro system
2 Speakers
1 Remote control (incl. 2 x 1.5 V batteries)
1 AM (MW) antenna
1 FM (USW) dipole antenna
1 Operating instruction manual
Technical Data
Micro system
Rated voltage: 230 V~, 50 Hz
Power consumption:
In standby 4 Watt
During operation 33 Watt
Backup batteries: 3 x 1,5 V Type AA
(not supplied)
Radio frequency range: MW (AM): 530 – 1600 kHz
USW (FM): 87,5 – 108 MHz
Measurements
(W x H x D): 16 x 25,8 x 21 cm
Weight : 2,7 kg
Speaker power rating.: max. 8 Watt RMS
Operating temperature: 5° - 40°C
Storage temperature : —20° - 60°C
Protection class: II
The device's technical details allow for an adjustable frequency
range of MW (AM) 522-1620 kHz. In other countries different
national regulations regarding the assigned radio frequency
ranges can exist. Please note that information received outside
of the assigned radio frequency ranges may not be used,
passed on to third parties or otherwise misused.
Cassette player/recorder
Cassettes: Standard cassettes
(C-90 or shorter)
Tape speed: 4.75 cm/sec.
Remote control
Batteries: 2 x 1,5 V Type AAA
Safety information
Do not permit children to handle electrical appliances without •
supervision, as they cannot correctly assess the possible dan-
gers of injury.
Unplug the power cord after every use and before cleaning, •
so as to prevent the device from switching on inadvertently.
Check the device and all parts for visible damages. The •
safety concept can work only if the device is in a faultless
condition.
The power plug must always be easily accessible, so that •
in the event of an emergency the device can be quickly
disconnected from the mains power supply.
Risk of explosion!
Do not throw batteries into a fire. Do not recharge the •
batteries.
Risk of electrical shocks.
Connect the device to an electrical wall socket with a •
mains voltage of 230 V / 50 Hz.
Do not operate the device if the connection cord or the •
power plug is damaged.
The connection cord or device should be immediately re- •
paired or exchanged by the customer service department
if they fail to function faultlessly.
NEVER submerse the device in water. Wipe it only •
with a slightly damp cloth.
Do not expose the device to rain and never use it in a damp •
or wet environment.
Make sure that the power cord does not become wet •
during operation.
You must not open the device housing or repair the device. •
Should you do so, the safety of the device may be compro-
mised and the warranty becomes void.
Do not place objects containing fluids, e.g. flower vases, on •
or near the device.
Information concerning power disconnection •
To completely disconnect the device from the power source
the power plug must be removed from the power socket.
For this reason the device should be placed in a position
where a constant unobstructed access to the power socket
is assured, thus in an emergency situation you are able to
immediately pull out the power plug. To eliminate the risk of
fire you should completely disconnect the power plug from
the power socket when the device is not going to be used
for a long time, for example, during holidays.
Always grasp the power cord by the plug. Do not pull on •
the cord itself and never touch the power cord with wet
hands as this could result in a short circuit or an electrical
shock. Do not place the device, furniture or anything else
on the power cord and make sure that it does not become
clamped. Never tie knots in the power cord and do not join
it to other cables. Place the power cord in a position where
it can not be trod on. A damaged power cord can cause
a fire or electrical shock. Check the power cord from time
to time. Should it become damaged contact your nearest
authorized customer service centre or dealer to have it re-
placed.
Risk of fire!
Do not use the device in the vicinity of hot surfaces. •
Do not place the device in locations that are subject to •
direct sunlight. Otherwise, it may overheat and become
irreparably damaged.
Never leave the device unattended while it is being used. •
Never cover the ventilation slots of the device while it is on. •
Avoid placing this device in locations that provide insufficient
ventilation or hot locations and do not place the device in
direct sunlight or under strong artificial light sources.