English SilverCrest
DS-1020T
26
Using the Flash
The flash [11] doesn't only enhance the brightness under bad lighting
conditions. You can also use it for backlight shots or when the subject is
located in shadow. Open the Recording menu whilst in capture mode in
order to select a flash setting.
Tap
the button to open the Record menu.
Tap on the button that indicates the current flash setting. An option
bar with the available settings (see the figure) is displayed.
Tap on a setting to select it.
Tap
the button to exit the Record menu.
The following flash settings are available:
Icon Description
The flash will fire automatically whenever the shooting
conditions require extra lighting.
A pre-flash will be sent in order for people's eyes to
adapt to the flash. This will reduce the red-eye effect in
your pictures. The flash will fire again to take the photo,
but only when necessary.
An automatic pre-flash is sent when the camera
automatically detects a face within the focus area.
The flash will fire always.
The flash will fire for lower shutter speeds (soft flash),
keeping a darker background.
The flash will never fire, even in total darkness.