20
12.3 Muting the speakers
To mute the connected speakers, briefly press the “MUTE” button . “MUTE” will appear in the display. In order to return to the
original volume, briefly press the “MUTE” button again or turn the volume control dial. The message “MUTE” will turn off and
the volume will be at the same level as before it was muted.
13 Radio (Tuner) Mode
13.1 Selection of the radio station
Turn on the SilverCrest CRE-521 MP3/WMA/OGG car radio with the “PWR” button . If the device was turned off while it was in
RADIO mode, the last selected station will be heard. If the device is set to an operation with one of the different data storage
media, please press the “MODE” button until you get to the radio function.
13.2 Select the wavelength range
FM (UKW) range:
To select the FM range, briefly press the “BAND” button repeatedly until the desired range “FM 1“, “FM 2“
or “FM 3“ and the current frequency appear on the display.
MW range:
To select the MW range, briefly press the “BAND” button repeatedly until the display indicates “MW 1” or “MW 2”
and the current frequency.
Note:
After selecting a range, the station last selected in this range will be heard.
Note:
The MUTE setting also affects the LINE outputs. The MUTE function interrupts the playback of the audio tracks until the
function is turned off.
