- 49 -
press the device button
e
whose assignment you want to
delete. To conclude, “SUCCESS” briefly appears, then you
will again read “MODE” in the LCD display. Now press
any other further desired device buttons
e
to also delete
their assignment.
7. Otherwise, you can exit the menu by pressing the EXIT
button
y
.
Timer configuration
The URC offers 2 timer modes, sleep timer and event timer.
Sleep timer
1.
Press the device button
e
for the device that is to be con-
trolled (i.e. VCR).
2.
Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
3.
Press the
or
button
t
until "TIMER SETUP" is
shown. Press the OK button
l
"TIMER SLEEP" appears in
the LCD display
q
.
Confirm the selection of this function
with the OK button
l
.
4.
Now, below to the right in the LCD display
q
blinks the
minutes for the remaining time of the selected device.
Set with the
or
button
t
the desired value from 1
to 99 minutes. Press the OK button
l
to confirm.
With
programmed sleep-timer the LCD display
q
shows “
z
z”
on the right next to the time.
5. Position the remote control in such a way that your infra-
red signal can reach the device to be switched off. After
expiration of the set time the remote control will switch the
device off.
6.
If you now press the S button
r
“SL” is shown in the dis-
play
q
below on the left.
Event timer
The remote control has 4 event timers available via which
you are allowed to send out specific series of button combi
-
nations at designated times.
1.
Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
2.
With the
or
button
t
select "TIMER SETUP" and
confirm with the OK button
l
. "TIMER SLEEP" appears
in the LCD display
q
.
With the
or
button
t
select
the desired memory slot "TIMER SETUP 1" to "TIMER
SETUP 4" and confirm with the OK button
l
.
3. Now the hour of the time of day, to which the desired
button combinations are to be carried out, blinks. Set with
the
or
button
t
the desired hour and press for con-
firmation the OK button
l
.
4. Now the minutes of the time of day, to which the desired
button combinations are to be carried out, blinks. Set with
the
or
button
t
the desired minutes and press for
confirmation the OK button
l
.
BDA_SFB 10.1 B2 - IAN-93436_gb.indd 49
12.11.2013 16:01:41
Содержание 93436
Страница 2: ...CV_SFB 10 1 B2 IAN 93436 indd 9 30 09 2013 18 17 58 ...
Страница 13: ... 11 A_SFB 10 1 B2 IAN 93436_es indd 11 12 11 2013 15 58 57 ...
Страница 43: ... 41 A_SFB 10 1 B2 IAN 93436_gb indd 41 12 11 2013 16 01 41 ...
Страница 71: ... 69 A_SFB 10 1 B2 IAN 93436_de indd 69 12 11 2013 16 02 39 ...
