Silvercrest 89366, Руководство по эксплуатации

Страница: 10 / 51

7
SMZCD 400 A1
GB
IE
5) Ensure that the sealing ring 4 is inserted into the lid 3 : the two rubber lips
on the sealing ring
4
must engage in the plastic rail in the interior of the lid
3
.
6) Then close the bowl
7
with the lid
3
: Place it on the bowl
7
so that the
lugs on the lid 3 engage in the slots on the bowl 7 . Then turn the lid 3
so that the lugs slide unter the slots and the lid
3
locks into place.
7) Place the motor unit
2
on the lid
3
.
8) Insert the plug into a mains power socket.
9) Press the motor unit
2
down to start the motor at normal operating speed.
10) To obtain the higher processing speed “Turbo“ for the contents, in addition
to the motor unit
2
press and hold down the turbo button
1
. As soon
as you release the turbo button
1
the appliance returns to the normal
operating speed.
NOTICE
► Should larger pieces of the contents collect on the wall of the bowl while
processing, lift the motor unit
2
from the lid
3
. Shake the bowl
7
vigorously
and then continue with the processing. Remove possible residues with a
dough scraper.
► Before starting the processing, particularly hard foods must be cut into
smaller pieces (about 2cm). Otherwise, the motor will block. Select a
pulsating processing for hard foodstuff s. For this, press the turbo button
1
repeatedly for a short time (in addition to the motor block
2
). Should the
foodstuff not be completely chopped, you can either cut it into smaller
pieces or lift the motor unit
2
from the lid
3
. Shake the bowl
7
vigor-
ously and then continue with the processing.
11) When the contents have been suffi ciently chopped, release the motor unit 2
and, if necessary, the turbo button
1
.
12) Remove the power plug from the mains power socket.
WARNING - RISK OF INJURY!
► Never attempt to remove foodstuff s from the bowl
7
as long as the
blade
6
is still rotating. Contents could shoot out and make a mess.
13) Wait until the blade
6
has stopped rotating.
14) Lift the motor unit 2 from the lid 3 and remove it.