48 GB
7. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric shock!
• Pull the mains plug
2
out of the wall sock-
et before you clean the multi chopper.
• The motor block
3
, the power cable
and the mains plug
2
must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water should
be sufficiently clear that you can see the
blade insert
6
easily.
WARNING! Risk of material damage!
Do not use any astringent or abrasive clean-
ing agents.
Dismantling the device
1. Pull out the mains plug
2
.
2. Remove the motor block
3
.
3. Rotate the working cover
4
anti-clock-
wise and remove it.
4. Carefully remove the blade insert
6
(if
necessary together with the cream at-
tachment
5
) from the vessel
7
.
5.
Figure A:
Carefully press the blade
insert
6
downwards out of the cream at-
tachment
5
.
6. Remove the vessel cover
9
from the ves-
sel
7
.
How to clean properly
1. If necessary, wipe down the motor
block
3
and the power cable
2
with a
damp cloth. Ensure that the motor
block
3
is completely dry before the
next time it is used.
2. Rinse all accessory parts manually, ex-
cept for the motor block
3
.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Some cleaning tips
• Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
• After processing very salty or acidic
types of food, you should immediately
rinse the blade insert
6
thoroughly.
8. Storage
DANGER for children!
Keep the
device out of the reach of children.
DANGER!
In order to avoid accidents, the
mains plug
2
must never be connected to a
wall socket while in storage.
• Assemble the multi chopper for storage
purposes. This allows the blade insert
6
to be stored safely.
• Select a location where neither high
temperatures nor moisture can affect the
device.
9. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
Fault
Possible causes/
Action
No function
• Has the device been
connected to the pow-
er supply?
• Check the connection.
• Is the top edge of the
working cover
4
clean?
__RP88609_B1.book Seite 48 Dienstag, 15. Januar 2013 3:30 15