Silvercrest 377187 2110, Руководство по эксплуатации

Страница: 20 / 320

GB
│
IE
│ 15 ■
SRR 3.7 C3
Cleaning with the brush
Cutting unit
Clean the 3 shaving heads of the cutting unit
2
after every shave
using the brush
e
.
1) Take hold of the cutting unit
2
with three fingers in the grip
recesses
3
and pull it off.
2) Tap the cutting unit
2
on a flat surface or blow off the hair cuttings.
3) Use the brush
e
to remove any remaining hair cuttings.
4) Replace the cutting unit
2
flush on the appliance. Ensure that it
snaps into place and is seated firmly.
Long hair trimmer
■ Clean the long hair trimmer
4
after every use with the supplied
brush
e
.
■ Oil the long hair trimmer
4
around every 6 months with a drop
of sewing machine oil.
Cleaning under running water
1) Take hold of the cutting unit
2
with three fingers in the grip
recesses
3
and pull it off.
2) Hold the cutting unit
2
under the running water so that the water
flows through the shaving heads from the inside to the outside.
CAUTION! MATERIAL DAMAGE!
► Hold only the cutting unit
2
under running water! The
shaver handset can be damaged irreparably if it is held under
running water.
3) Allow the cutting unit
2
to dry.
4) Replace the cutting unit
2
flush on the appliance. Ensure that it
snaps into place and is seated firmly.