Silvercrest 375598 2104, Инструкции по эксплуатации и безопасности

Страница: 18 / 85

18 GB/IE
protective gloves at all times if such
an event occurs.
In the event of a leakage of
batteries/rechargeable batteries,
immediately remove them from the
product to prevent damage.
Remove batteries/rechargeable
batteries if the product will not be
used for a longer period.
Risk of damage of the product
Only use the specified type of
battery/rechargeable battery!
Insert batteries/rechargeable
batteries according to polarity marks
(+) and (-) on the battery/recharge-
able battery and the product.
Use a dry lint-free cloth or cotton
swab to clean the contacts on the
battery/rechargeable battery and
in the battery compartment before
inserting!
Remove exhausted batteries/
rechargeable batteries from the
product immediately.
Before first use (Fig. C)
Remove all packaging materials from the product.
Turn the product over and place it on a soft under-
lay to avoid scratching the surface. Loosen the
screw
6
located at the cover of the battery com-
partment
5
on the back of the product.
Open the cover of the battery compartment
5
on the back of the product.
Pull out the insulation strip from the battery
compartment
5
.
Close the cover of the battery compartment
5
and tighten the screw
6
.
Replacing the battery (Fig. C)
Turn the product over and place it on a soft underlay
to avoid scratching the surface. Loosen the screw
6
located at the cover of the battery compartment
5
on the back of the product.
Open the cover of the battery compartment
5
on the back of the product.
Remove the used battery, if present.
Insert a battery type CR2032 in the battery
compartment
5
.
Note: Make sure you insert the batteries with the
correct polarity. This is indicated on the cover of
the battery compartment
5
.
Close the cover of the battery compartment
5
and tighten the screw
6
.
Operation
Set the product on a solid, level and flat surface to
weigh.