■
56
│
GB
│
MT
SEMM 1470 A2
“Large” latte
–
Press and hold the “Large” latte button
3
for about 3 seconds until
the pump starts to work. Milk froth comes out of the milk nozzle
0
.
–
Once the desired quantity of milk froth has been produced, stop milk
froth production by pressing the “Large” latte button
3
again. You
can set a duration of 5–90 seconds.
–
Following the milk froth production, the espresso comes out of the
espresso outlet
q
to prepare the latte macchiato.
–
The next time you prepare a latte macchiato using the “Large” latte
button
3
the newly programmed duration will be used for milk
output.
Frothed milk
You can also produce only frothed milk, for instance, to make hot chocolate.
1) Fit the sieve holder
p
.
2) Ensure that there is enough milk in the milk tank
6
. Add more milk if
necessary.
3) Place a suitable cup on the drip grille
8
. If you are using a small container,
pull out the tray for small cups
9
and place the container on it.
4) Set the milk nozzle
0
so that it is pointing into the cup.
5) Switch the appliance on using the on/off switch
i
and wait until all control
lamps light up permanently. The appliance has now heated up.
6) Press the “Large” cappuccino button
2
2x in a row. The control lamp
for the “Small” cappuccino button
e
and the control lamp for the
“Large” cappuccino button
2
light up and frothed milk comes out of
the milk nozzle
0
.
7) Stop the milk output by pressing any button. The milk will stop coming out
automatically after 70 seconds.
8) Switch the appliance off using the on/off switch
i
.
9) Clean the appliance as described in the section “Cleaning and Care”.
IB_359628_SEMM1470A2_LB5.indb 56
06.07.2021 15:08:36
Содержание 359628 2101
Страница 3: ...A t 0 9 8 7 2 1 z i u 6 5 4 3 B o C p a s d q w e r f ...
Страница 37: ... 34 IT MT SEMM 1470 A2 ...
Страница 71: ... 68 GB MT SEMM 1470 A2 ...
Страница 105: ... 102 DE AT CH SEMM 1470 A2 ...