Silvercrest 359628 2101, Руководство по эксплуатации

Страница: 54 / 106

GB
│
MT
│
51 ■ SEMM 1470 A2
Preparing cappuccino
1) Ensure that there is enough water in the water tank z . Add more water if
necessary.
2) Ensure that there is enough milk in the milk tank
6
. Add more milk if necessary.
3) Select whether you want prepare a cappuccino with a single or double
espresso and fit the corresponding espresso sieve
s d
in the sieve holder
p
.
4) Add the espresso powder to the espresso sieve s d and fit the sieve
holder
p
.
5) Place a suitable cup on the drip grille 8 . Depending on the size of the cup,
you may also want to pull out the tray for small cups 9 and place the cup
on this.
6) Set the milk nozzle 0 so that it is pointing into the cup.
7) Use the “Steam quantity” dial
5
to adjust how much steam comes out of
the milk nozzle
0
together with the milk. This changes the consistency of
the milk foam:
Turn the “Steam quantity” dial
5 anticlockwise to decrease the amount
of steam. The milk foam becomes coarser.
Turn the “Steam quantity” dial
5 clockwise to increase the amount of
steam. The milk foam becomes creamier. Make sure you do not turn the
“Steam quantity” dial
5 further than the “ ” marking. Otherwise, you will
be in cleaning mode (see section “Cleaning and care”).
NOTE
► You can also correct the amount of steam during preparation by turning the
"Steam quantity" dial
5 .
8) Switch the appliance on using the on/off switch
i
and wait until all control
lamps light up permanently. The appliance has now heated up.
9) Press the “Small” cappuccino button e if you want to prepare a single
cappuccino. The control lamp for the “Small” cappuccino button e lights up.
Press the “Large” cappuccino button 2 if you want to prepare a large
cappuccino. The control lamp for the “Large” cappuccino button 2
lights up.
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet q ,
the milk has stopped flowing out of the milk nozzle
0
and all control lamps
light up. You can now remove your cappuccino.
IB_359628_SEMM1470A2_LB5.indb 51 06.07.2021 15:08:35