Silvercrest 341803 1910, Руководство по эксплуатации

Страница: 18 / 128

GB
│
IE
│
NI
│
15 ■
SKHO 40 A1
Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear
the ringtone in the headphones and playback is stopped. After
finishing the call, playback will be resumed automatically.
► You can accept/reject calls via the headphones or your smart-
phone. The sound is automatically played back through the
headphones.
Button
4
Function
Press 1 x briefly (for incoming call) Accept call
Press 1x briefly (during call) End call
Press and hold for approx. 2 seconds (for
incoming calls)
Reject call
Music playback via AUX IN
You can use the supplied audio cable
w
to connect the headphones
to non-
Bluetooth ®
-compatible playback devices. In AUX IN mode,
the headphones behave like normal, cable-connected headphones
and can even be used with an empty battery. The
Bluetooth
®
function is deactivated and the buttons on the
headphones do not function.
♦ Make sure that the headphones are switched off.
♦ Connect the audio cable
w
to the
AUX IN
socket
7
of the
headphones.
♦ Connect the audio cable
w
to the audio output (e.g. head-
phone jack) on the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section Wearing
the headphones .
♦ Set the desired volume on the playback device.
IB_341803_SKHO40A1_LB6.indb 15 11.05.2020 13:45:19