Silvercrest 337270 2001, Руководство по эксплуатации

Страница: 27 / 106

SNS 45 B4
■ 24
│
GB
│
IE
│
NI
│
CY
TIP
► If you want to apply ornaments or small rhinestones to the nail, use the
sharp side of the Spot swirl
9
to place them in the non-hardened most
recent layer of the UV gel
i
. Then harden the UV gel
i
.
Apply an additional, very thin layer of UV gel
i
over the nail and then
harden it to ensure that the ornaments are held firmly in place. This gives
the ornaments better protection.
Ƈ
To finish, apply a coating of clear varnish onto the nail to give it a gloss
finish.
Ƈ
For care, add a little nail oil
p
to the cuticle.
Topping up
NOTICE
► Because the natural nail grows, over time the attachment of the nail tip
t
can raise itself. For this reason the gap between the cuticle and the nail
attachment must be topped up from time to time.
► A topping up is required about every 2 - 3 weeks.
Ƈ
Using the sandpaper file
r
, file around the attachments of the hardened
gel.
Ƈ Use the sanding block
8
until the nail is no longer shiny.
Ƈ
When done, reapply UV gel
i
and harden it again.
NOTICE
► In this regard, see the previous chapters
Application of the UV-Gel
,
Hardening of the UV-Gel
.
French nails
“French nails” means decorating the fingernails with a white tip.
Ƈ Model the nail as described in the chapter entitled “Application” until you
have applied the first layer of UV gel
i
and hardened it.
Ƈ Use the round application side of the Spot swirl
e
to apply French gel
o
to the nail tip. Always take up new French gel
o
with the point and model
the white nail tip with light circular movements.
Ƈ Proceed with the other nails in the same way.
Ƈ
Now harden the nail using a setting of 150 seconds.